Menu

Pivot Joint GE F 80

Group

A437

Application

Applicable as a bracing element for single-arm cantilevers in conjunction with siFramo 80 section, and for the knee-brace reinforcing of siFramo 80 frame constructions. The pivot can be installed with angles from 25° to 155°.

Installation

Attachment of Joint GE F 80 to Beam Section TP F 80 by means of 4 Self Forming Screws FLS F at the base plate. The support profile TP F 80 plugged onto the octagon is also attached by means of 4 Self Forming Screws, so 8 Self Forming Screws are necessary in total. The cutting length of the support profile can be determined by the table below-mentioned. After installation at the desired angle the screws have to be tightened with 40 Nm.

Categories: ,

Description

Technical Data

Type Height H
[mm]		 Length L
[mm]		 Width B
[mm]		 Angle α Dimensions of
base plate
[mm]
GE F 80 – 80 140 80 80 25° – 155° –
GE F 80 – 80 q 140 80 80 25° – 155° 190 x 80 x 8

Cutting length c of support profile between two joints:

b [mm]
1000		 b [mm]
1500		 b [mm]
2000		 b [mm]
2500
α a [mm] c [mm] c [mm] c [mm] c [mm]
25° 2095 2155 3340 4525 5710
30° 1701 1810 2810 3810 4810
35° 1410 1565 2435 3305 4180
40° 1184 1380 2160 2940 3720
45° 1000 1245 1955 2660 3370
50° 846 1145 1800 2450 3100
55° 713 1060 1670 2285 2895
60° 596 1000 1580 2155 2730
65° 489 950 1500 2055 2605
a = vertical length from centerline of joint to bottom of profile at connection
b = horizontal length of cantilever from connection to centerline of joint
c = cutting length of support profile between two joints
α = angle at the opposite of the vertical bracing
Material: Steel, HCP
Type W
[kg]		 Quantity
[pack]		 Part
number
GE F 80 – 80 2.1 1 113835
GE F 80 – 80 q 3.0 1 113834

Related products