Scope of delivery
|HR trimming *
|M12 MA S||4 x M12||4 x M12||4 x M12||4 x M12 x 80|
|M16 MA S||4 x M16||4 x M16||4 x M16||4 x M16 x 100|
* HR trimming according EN 14399-3 consisting of: Hexagon bolt M12 or M16, 2 washers, 1 hexagon nut
|1.||Position stop plate on component to be mounted.|
|2.||Position the Beam Clip with the slit side into the indentations of the stop plate and with the lug on the steel girder.|
|3.||Install support plate and HR trimming and tighten accordingly.|
The support plate secures a rectangular assembly of the bolt and prevents its shifting or bending stress. In conjunction with the HR trimming a continuous and predictable preload force is guaranteed. The stop plate ensures a tight fit of the Beam Clip.
|Tightening torque MA
per Beam Clip
|Shear force load capacity Fz
per Set = 4 Beam Clips
|M12 MA S||1 – 30||85||32.9||15.1 *|
|M16 MA S||4 – 40||150||39.1||16.7 *|
* The specified data relate to the worst case with flange thicknesses 30 mm (M12) or 40 mm (M16) as well as a coefficient of adhesion µadhesion = 0.20.
A possibly operating tensile force Fy isn’t included.